Yes, we can complete a one-day installation for specific coating systems in the Canadian climate when conditions are right. For our hybrid epoxy-polyurethane formulation, the fast-curing chemistry allows us to apply multiple layers—including primer, base coat, and topcoat—within a single day.
To ensure a successful one-day turnaround in regions like Edmonton and throughout Alberta, we follow three essential requirements:
- Meticulous Surface Preparation: We utilize dust-free methods, such as diamond grinding or shot blasting, to ensure proper adhesion.
- Substrate Moisture Control: We verify low moisture levels to prevent curing delays or bond failure.
- Climate Management: We schedule installations when ambient conditions and temperature control promote rapid curing.
While this rapid process makes the floor ready for foot traffic in just 1–2 hours and full use within 24 hours, some decorative finishes, such as metallic epoxy floors, require longer cure times and are not practical for same-day service.
Our team is ready to design and install the decorative concrete surface that is right for you. [Request An Estimate](https://epo-tech.ca/polyaspartic-vs-epoxy-garage-floor-key-differences/) today to see if your project qualifies for a one-day installation.
Related FAQs
-
How do Moisture Vapor Barriers Prevent Epoxy Floor Failure?
Read More »Moisture vapor barriers prevent epoxy floor failure by forming a seamless, non-porous membrane that blocks water vapor from rising through the naturally porous concrete slab. Because concrete acts like a wick, drawing moisture from the ground, untreated slabs allow vapor to migrate upward and condense directly beneath the epoxy film. Without a barrier, this trapped […]
-
Why is Moisture Testing Important before Applying Epoxy?
Read More »Moisture testing is a critical first step because concrete is naturally porous, acting like a wick that draws moisture up from the ground. If this moisture is trapped under an impermeable coating without being properly addressed, it creates pressure that can cause the epoxy to blister, peel, and delaminate, leading to a total floor failure. […]
-
Why is a Uv Stable Topcoat Necessary for Outdoor Epoxy Projects?
Read More »A UV-stable topcoat is essential for outdoor epoxy projects because standard epoxy coatings are inherently vulnerable to ultraviolet (UV) degradation. When exposed to direct sunlight over extended periods, traditional epoxy undergoes a photochemical reaction that causes visible damage, including chalking (the development of a powdery residue on the surface) and yellowing or amber discoloration. To […]
-
How does Polyaspartic Compare to Epoxy for Sun Exposure?
Read More »Polyaspartic coatings are significantly more UV-stable than standard epoxy. While standard epoxy is prone to rapid UV degradation when exposed to the intense sun found in Alberta, polyaspartic formulations use aliphatic chemistry that resists yellowing and chalking at the molecular level. When comparing the two for sun exposure, we have found that polyaspartic topcoats offer […]
-
What Professional Equipment is Used for Concrete Surface Preparation?
Read More »To achieve superior concrete preparation and ensure optimal epoxy adhesion, we utilize a range of specialized, industrial-grade equipment designed for efficiency and safety. Our professional toolkit includes: Our team is ready to design and install the decorative concrete surface that is right for you. If you are ready for the flawless finishes your business deserves, […]