Yes, it is normal for an epoxy floor to experience a slight reduction in gloss or shine after five years of regular use. This change is typically concentrated in high-traffic paths where foot traffic and wheeled objects move most frequently.
After half a decade, you can expect to see the following visual changes as part of the natural aging cycle:
- Micro-abrasions and fine scratches: These accumulate over time in walked-on areas, catching the light differently and resulting in a softer gloss.
- Surface dulling: Continual abrasive action naturally wears down the smooth finish of the topcoat.
- Subtle tonal shifts: If the floor is exposed to significant sunlight, it may experience “ambering” (yellowing) or chalking unless a UV-stabilized topcoat was used.
It is important to note that these are cosmetic changes and do not indicate a failure of the floor system. As long as the coating remains firmly bonded and intact without widespread peeling or bubbling, your floor is performing exactly as designed.
To help preserve the shine for as long as possible, we recommend routine maintenance such as sweeping away gritty matter and using a pH-neutral cleaner. If you are looking for a long-lasting finish, our team is ready to design and install the decorative concrete surface that is right for you. Feel free to Get A Quote for a custom flooring solution built for the future.
Related FAQs
-
Why is Diamond Grinding Better than Acid Etching for Epoxy Preparation?
Read More »Diamond grinding is the preferred preparation method for epoxy projects because it creates a superior mechanical bond that acid etching simply cannot replicate. While acid etching uses chemical reactions to open pores, it often fails on dense or hard-troweled concrete and can leave behind chemical residues that actually weaken adhesion. We utilize Diamond Grinding for […]
-
How do You Make an Epoxy Pool Deck Slip-resistant?
Read More »To make an epoxy pool deck slip-resistant, we integrate specialized additives and application techniques that physically increase grip on the surface. Because plain concrete becomes treacherous when damp, creating a micro-rough surface is essential for safety. We achieve a high-traction finish through the following methods: Our team is ready to design and install the decorative […]
-
What is the Best Non-slip Coating for Outdoor Pool Decks?
Read More »When choosing the best non-slip coating for outdoor pool decks in the Canadian climate, we recommend three primary systems, each offering specialized safety and durability benefits: Regardless of the material, we utilize dust-free surface preparation—such as diamond grinding or shot blasting—to ensure the coating bonds permanently to the concrete. Our team is ready to design […]
-
What are the Benefits of 100% Solids Epoxy for Industrial Floors?
Read More »100% solids epoxy coatings offer superior durability and protection for heavy-duty industrial floors, especially in the demanding climates of Alberta and British Columbia. Unlike water-based or solvent-based alternatives, these systems contain no volatile solvents or water, meaning they do not shrink during the curing process. This results in a dense, high-build finish that provides flawless […]
-
How does 100% Solids Epoxy Differ from Water-based Coatings?
Read More »The primary difference lies in the chemical composition and resulting durability of the finish. 100% solids epoxy consists entirely of resin and hardener without water or solvents, whereas water-based coatings use water as a carrier that must evaporate to cure. Here are the specific ways these systems differ: Our team is ready to design and […]